Washer won’t drain — quick checks before you call

Standing water at the end of a cycle is messy and can damage floors. Many drain failures are simple; some need a pump or control repair.

Direct answer: A washer that will not drain is often a clogged drain pump filter, a kinked drain hose, a blocked standpipe, or a failed drain pump—start with the hose and filter before assuming the whole machine is dead.

Safe steps

1. Run a drain/spin cycle and note any error codes.
2. Confirm the drain hose is not pushed too far into the standpipe (can siphon or clog).
3. If your model has a front access filter, drain residual water per the manual and clean lint/coins.
4. Listen for the drain pump humming without moving water—that often means a jam or failed pump.

When to stop and call

If water will not leave after hose and filter checks, or you smell burning, stop DIY. Book Minneapolis washer repair: (612) 555-0199 or online.